|
|
|
04-10-2013, 02:21 PM
|
#1 |
 Join Date: Apr 2013
Posts: 2
|
Idle and Bogging Issue
Hello everyone my name is Rob. I am new here and i have a '12 Tao Tao Atm50. The other day i was headed to work and stopped at a stop sign and the thing just cut off on me. Got it back home and got it started but the idle was extrmemly low and it only ran a few seconds. I gave it a bit of gas on the next start and it immediately cut off. After a bit of research and speaking to a few friendly mechanics i figured perhaps i needed to adjust the carb a bit (i had already drilled out the brass cover from the a/f screw). Now here i sit, no progress made and no more ideas, any help would be much appreciated!!!
I was also told it could be an air flow problem which i have had before on this scoot so i removed the entire air filter assembly box but it had no effect whatsoever...  -Rob 2012 Tao Tao atm50 a-1 |
|
|
04-10-2013, 03:19 PM
|
#2 |
 
Join Date: Sep 2011
Location: staunton va
Posts: 319
|
you need a valve adjustment more likely
__________________
   2010 Cpi Oliver 70cc, naruku trans kit, downhill handle bars, tecnigas rsll pipe, s6 4g rollers, Vento R4 with 90cc 1e52qmf technigas next r 100cc pipe Naruku, 21mm race carb, s6 4.5 g rollers 
|
|
|
|
04-11-2013, 04:32 PM
|
#4 | |
|
Join Date: Sep 2011
Location: staunton va
Posts: 319
|
Quote:
__________________
2010 Cpi Oliver 70cc, naruku trans kit, downhill handle bars, tecnigas rsll pipe, s6 4g rollers, Vento R4 with 90cc 1e52qmf technigas next r 100cc pipe Naruku, 21mm race carb, s6 4.5 g rollers
|
|
|
|
 |
|
|
Linear Mode
