Help with Kinroad.

solkor · 03-23-2013, 02:02 PM

Does someone know where i can buy on internet Kinroad parts?
I have Kinroad XT70 and i am interested in Handlebar Switch Assy. right.

**Admin** · 03-23-2013, 05:38 PM

Anything here look promising?

http://www.ebay.com/sch/i.html?_odkw...witch&_sacat=0

solkor · 03-24-2013, 05:02 AM

TnQ.
I have one little problem.
I start the engine using the choke, warm it up, driving with choke and when stop twisting the throttle ( sry i dont know how do you say that) the engine want to stop working , and if i am not using choke it stop too. There is -5C temperatare here.
Does anyone know what is the problem?

qwertydude · 03-24-2013, 12:06 PM

-5c is your problem. These engines don't like the cold. They need an extended warm up so using choke for the first 5 minutes is normal. Also they might be set lean from the factory. So another good idea is to set the idle mixture screw properly using the idle drop method with a fully up to temperature engine. Usually minimum 15 minutes of running.

03-23-2013, 05:38 PM	#2
Admin Join Date: Apr 2011 Location: NY Posts: 990	Anything here look promising? http://www.ebay.com/sch/i.html?_odkw...witch&_sacat=0
	0

03-24-2013, 12:06 PM	#4
qwertydude Join Date: Jan 2010 Posts: 139	-5c is your problem. These engines don't like the cold. They need an extended warm up so using choke for the first 5 minutes is normal. Also they might be set lean from the factory. So another good idea is to set the idle mixture screw properly using the idle drop method with a fully up to temperature engine. Usually minimum 15 minutes of running.
	0