2 stroke falters at w.o.t

jeffwheels62 · 03-13-2013, 04:41 PM

My adly 2stroke is running great,unless I open the throttle all the way.
If I give it gas gradually,it's fine,but,if I twist i quick,it bogs out.
Any thoughts?

**Admin** · 03-13-2013, 05:28 PM

Too rich? What's the plug look like?

jeffwheels62 · 03-13-2013, 05:42 PM

Plug is a nice light brown color.

scootnwinn · 03-13-2013, 05:48 PM

What's the air filter look like?

Firehawk989 · 03-14-2013, 05:48 PM

My problem (issues at full throttle) may have been the carb, or may have been loose head bolts, or some combination thereof. If your filter is good and your carb is adjusted properly and not clogged, check your head bolts and spark plug torque while you're at it.

jeffwheels62 · 03-15-2013, 03:06 PM

The aor filter is clean,and pretty new.
I had a brand new carb in my garage,so,I installed it...same issue.
I'll check the head bolts and intake bolts tonight.
Thanks...I hadn't thought of that.

tatjim58 · 03-23-2013, 09:10 AM

Check air intake boot. Just fixed mine. They tend to crack in time. Good luck.

teddy554 · 03-23-2013, 09:25 AM

has it always done this or is it something new but clean the jet out sometimes you need to scrap the inside of a jet with a wire it builds up junk that cant be sprayed out,

03-13-2013, 05:48 PM	#4
scootnwinn Join Date: Aug 2011 Location: Tierra Azul, NM Posts: 739	What's the air filter look like? __________________ Do not fear mistakes. You will know failure. Continue to reach out. - Benjamin Franklin Join the HARDCORE 1983 Honda GL650I SilverWing
	0

03-23-2013, 09:25 AM	#8
teddy554 Join Date: Sep 2011 Location: staunton va Posts: 319	has it always done this or is it something new but clean the jet out sometimes you need to scrap the inside of a jet with a wire it builds up junk that cant be sprayed out, __________________ 2010 Cpi Oliver 70cc, naruku trans kit, downhill handle bars, tecnigas rsll pipe, s6 4g rollers, Vento R4 with 90cc 1e52qmf technigas next r 100cc pipe Naruku, 21mm race carb, s6 4.5 g rollers
	0

03-13-2013, 05:28 PM	#2
Admin Join Date: Apr 2011 Location: NY Posts: 990	Too rich? What's the plug look like?
	0

03-15-2013, 03:06 PM	#6
jeffwheels62 Join Date: Mar 2013 Location: Las Vegas Nv Posts: 19	The aor filter is clean,and pretty new. I had a brand new carb in my garage,so,I installed it...same issue. I'll check the head bolts and intake bolts tonight. Thanks...I hadn't thought of that.
	0

03-23-2013, 09:10 AM	#7
tatjim58 Join Date: Mar 2013 Posts: 3	Check air intake boot. Just fixed mine. They tend to crack in time. Good luck.
	0