|
|
|
|
|
06-19-2018, 08:49 PM
|
#1 |
 Join Date: Jun 2018
Posts: 16
|
*******update*****
I have found the issue about engine not cranking which was the clutch starter. I changed that and now it cranks. However, there’s no spark. I have checked for voltage output from DC CDI pin and there’s voltage reading of 5.8V. I can’t seem to find the specs on voltage output from CDI and voltage requirements for spark plug to spark. Can anyone help me on that? As far as troubleshooting, I have purchased new DC CDI (orange color, similar size as the origins DC CDI), new sparkplug and it wire and still no spark, yet there’s voltage coming out of DC CDI pin. I’ve been going back and forth with new and old set up, and still the same outcome. I’ve checked the ground and the green wire is the ground as the black wire delivers power everywhere after the key ignition is on. The red wire delivers power from battery to the key ignition. I’m running out of ideas, please help. Sent from my iPhone using Tapatalk |
|
 |
|
|
Hybrid Mode
