150cc tao tao carb upgrade too big -

J Boogie · 06-17-2014, 02:55 PM

the final solution ended up being a 31mm riser AND an angled clocking flange with 5mm spacers between them (and another between that and the intake manifold). Now it clears back part of frame but protrudes up and out far enough to be in the way of the seat bucket. I will probably end up modding seat bucket (cutting out deepest part that is a problem, and creating a new bottom 'floor' in there somehow). Thought I would post this solution regardless of lack of help from community in case it helps someone later. ~EZ.

06-17-2014, 02:55 PM	#2
J Boogie Join Date: Jun 2014 Posts: 4	the final solution ended up being a 31mm riser AND an angled clocking flange with 5mm spacers between them (and another between that and the intake manifold). Now it clears back part of frame but protrudes up and out far enough to be in the way of the seat bucket. I will probably end up modding seat bucket (cutting out deepest part that is a problem, and creating a new bottom 'floor' in there somehow). Thought I would post this solution regardless of lack of help from community in case it helps someone later. ~EZ.
	0