|
|
09-17-2016, 06:48 PM | #1 |
Join Date: Jul 2016
Posts: 18
|
I got it, easy solution. I put the belt into the plates before i put the clutch back together. Taped the belt together so it was around halfway down the plates, put the clutch on its rod. Assembled variator,and the the clutch. I also made a compression tool with a couple long bolts amd 2 boards with hole in top to let a socket tighten the nut. I wannna post a picture of it. It worked very well and cheap amd easy to make.
__________________
Smm jazzie gy6 , from 50 to 100cc Orange black cdi cable Purple racing cdi box 20mm carb jets unknown as of now Open element air filter Mirror stereo system Roller weight nd clutch spring unkown Rider 6 foot 270 pounds |
|
|