|
|
|
Thread Tools | Search this Thread | Display Modes |
05-18-2017, 09:47 AM | #2 |
Join Date: May 2016
Posts: 34
|
Well guys sorry for the late update but I figured it out, a lead on the horn came loose, and a barrel connector on the 'green' wire in the main wiring harness came loose. This was probably due to the horriblly bumpy potholed roads I travel on. I did away with the barrel connector on the green wire and soldered the wires together then heatstrinked. I also heatshrinked the horn lead on so it wouldn't come off again. All has been well now!
|
|
|