cf moto glory 150

[jrryan]

This scooter is one of CF Motos 150 class of liquid cooled 150's with EFI. It also has a 3 phase stator and a 6-pin R/R not typical of most Chinese scooters. Testing of the stator also needs to be considered instead of just assuming the R/R is bad as this R/R is not cheap and buying one and having a bad stator would be a waste. Since this stator is a 3-phase unit testing is different than the single phase stator on most 150cc scooters. With a cooling fan and EFI the scooter generates a lot more needed power.

The diagram below is for the Glory and shows the stator layout and R/R wire configuration:



If you want to know the testing specs and how to test this stator then check here and I'll tell you the procedure:




JR

[8307c4]

Originally Posted by jrryan

The diagram below is for the Glory and shows the stator layout and R/R wire configuration:
If you want to know the testing specs and how to test this stator then check here and I'll tell you the procedure:

Woohoo hot dang I just saw my cheap Chinese imitation Honda clone sorry gy6 wannabe scooter flying over the side of a cliff never to be seen or heard from again! The good news is it finally hit 60+mph too!