Go Back   ScootDawg Forums > Media :: Reviews :: Classifieds :: General > Member Reviews & Reports > Scooters
Reply
 
Thread Tools Search this Thread Display Modes
Old 05-28-2017, 10:08 PM   #1
2017 Adly RT50
by sc00ter sc00ter is offline 05-28-2017, 10:08 PM


Quick review of a RT50. First things first, you will either love or hate the looks. I have always had a fascination with the Honda CT70 but dont wanna deal with a old bike from the 70's. Adly is built by Her Chee in Taiwan, and my friend had the Moto Roma version of the RT50 called the Bee back in the early 2000's and I loved riding it every chance I got. Now I have one, so here goes:
ERGONOMICS-The seat has a slight forward tilt and its not that comfy. Im 5'9" and 200 pounds and the reach to the bars is comfortable (they can be adjusted if needed) and the peg position is pretty good. Just that seat gets painful after awhile. Looking into getting it re-worked, more flat with better padding.
ENGINE/TRANS-Will hit 40mph top end (bone stock and not de-restricted) and is quick enough on take off. The stock exhaust has a catalytic converter in it and it is very quiet. I need to bring it back to the shop it came from and get them to mess with the carb. It has a weird flat spot at 30mph but it is not dangerous or anything terrible, just annoying. Engine and transmission are not as smooth as my past Zuma 2 strokes but that "might" get better with some miles. Im at 350 kilometers so will update if it gets better OR worse.
BUILD/RIDE QUALITY-Stock Kenda tires grip very well and the brakes work pretty good. Front will squeals sometimes though. Short wheelbase will buck you from the seat on big bumps. Headlight is good but you will outrun it if the scooter goes any faster. Tail light is nice and bright. Good fit and finish overall. Some exposed wires in strange places. Paint looks nice but Im debating removing the decals.
OTHER NOTES-Bintelli says a rear rack is in the works. Has NO native storage. Easy to fill with gas and the locking gas cap pops on/off with ease. The oil tank is under the seat. Thankfully you dont have to add 2 cycle oil all the time because the seats a pain to remove and re-install. Battery is also squeezed under there. I carry a small disc lock on the grab rail by the seat. The big 12" steel wheels make disc access very easy. Steering column lock is easy to use but do you really trust them? Front suspension is pretty good overall and the rear shock has a "click" adjust ring. Very easy to put on the center stand and sits low enough for short people to sit flat footed. Gets attention almost every time you are stopped. Harley guys at work teased me BUT they jumped at the chance to take it for a ride.
FINAL NOTES-Overall happy with it. Weird, ugly, fun and unique. Has a 2 year warranty but I will start modding it once I hit around 1000 kilometers (the tiny speedo favors KPH's) and the dash lights are kinda hard to see in daylight but the turn signal has a nice "beep" to it. Oh, and the front tire SOAKS your feet in the rain! Its my toy and nice weather commuter (16 miles each way to work). Will add/edit as things change. ALMOST forgot! No gas gauge! Has a old school pet cock that has off/on/reserve. It will stall on take off when the tank gets low. Then you hope you swapped it back to run from the prior fill up as you reach down to put it on reserve and start looking for a gas station. I have yet to test its range!


Views: 15428
Reply With Quote
Old 05-31-2017, 11:28 AM   #2
sc00ter   sc00ter is offline
 
Join Date: May 2017
Location: Norfolk, VA
Posts: 513
Okay, here we go. I have only found online service manuals. I prefer paper manuals (Im old) but have yet to check into getting one. Judging by the online ones, Im not to impressed with the service manuals though. The owners manual is just as vague. I have found EVERYTHING is crazy tight from the factory! Broke a strap wrench trying to get the variator off! Was trying to put a Multivar 2000 on. Cannot get the drain screw on the carb to come loose (gets boggy on idle sometimes). There was something else crazy tight but I forgot what it was..... The insects came out and made me quit before I could see if a Leo Vince ZXR exhaust from a Zuma bugeye fit the RT50. Also found that the rear shock is loooong, and an adjustable RRGS from a Zuma is not long enough. I think the 12" wheels are the cause for the looong rear shock. Found hand guards to but not feeling the look, plus its summer so they are not needed yet. Also found a great solution for a drink holder. Need to learn how to post pics. I have a tuned to the hilt Zuma motor, and I think the mounting points might line up....... Gonna enjoy the RT as is for awhile longer. Need to get the bucking suspension ironed out first.
  Reply With Quote
Old 06-03-2017, 09:48 AM   #3
sc00ter   sc00ter is offline
 
Join Date: May 2017
Location: Norfolk, VA
Posts: 513
Quick notes update: So, Im coming home in pouring rain of death. Yes, my feet/legs are getting SOAKED! Im cruising along at 35mph and the scoot stalls for a second then starts running again. Im thinking Im outta fuel so I switch it to reserve. The owners manual does not even acknowledge the petcock. When in the OFF position, the long half of the lever covers the word OFF. When in ON does the lever cover the word ON or is the ON word supposed to be uncovered? When your'e on RESERVE, is it word RESERVE covered or exposed? Still have not found out officially, so back to my rain notes. I get to the gas station and fill it back up, but it only took a half gallon? That is not a reason to switch to RESERVE? The scoot starts back up and I continue home. I pull into the driveway and go between the houses to get to the garage and hear a strange "snapping" sound. Look around (still in the rain) and notice the spark plug cap popped off! Barely on enough to stay running. Upon closer inspection (next morning) it seems the inside of the spark plug cap was all rusty and corroded inside from water getting into it, thus rusting the retainer clip out making it fail. I tried to rebuild it but it stripped on the inside of the cap during reassembly so I just put a cap end off a Zuma on with AMPLE dielectric grease inside the boot and around the spark plug end. That should keep the water at bay (wheel sprays directly on it) and the corrosion/rust out of the inside of the boot. Currently @ just under 600 kilometers. Might alert my local dealer of this issue and see if they become pro-active or not, as Im trying to pull the RT50 owners together for rides and such.



Login or Register to Remove Ads

Last edited by sc00ter; 06-03-2017 at 02:06 PM.
  Reply With Quote
Old 06-16-2017, 09:58 PM   #4
sc00ter   sc00ter is offline
 
Join Date: May 2017
Location: Norfolk, VA
Posts: 513
New seat is $75 and my seat guy is sloooooow, so I may just take it off the road while the seat is being redone. It (seat) REALLY hurts my back and the jarring suspension is not helping either. So basically it has not been ridden in 2 weeks. If it gets pushed to the back of the garage thats a death sentence, as I will loose interest in it! Gotta do something soon. Other than the horrible ergonomics for my lower back I still like it. Guess Im just a glutton for punishment, but my back finally said NO! So its off the road till a solution is found. Lets see how corrected seat ergos work!
  Reply With Quote
Old 06-17-2017, 07:41 PM   #5
sc00ter   sc00ter is offline
 
Join Date: May 2017
Location: Norfolk, VA
Posts: 513
Just found out something interesting. It seems Adly sells a 70cc bbk (thru Bintelli) that if installed by the dealer you keep the remainder of your 2 year warranty! It keeps the stock exhaust, just has more noise AND speed. May look into it..... Curious to know if its a cast iron kit or a aluminum kit. Sure I will never find out who makes it either but it seems good quality. The shop Bullseye scoot MOVES with the kit installed and has a good number of miles on it with no issues.



Login or Register to Remove Ads
  Reply With Quote
Old 06-22-2017, 11:46 AM   #6
sc00ter   sc00ter is offline
 
Join Date: May 2017
Location: Norfolk, VA
Posts: 513
So I pulled the trigger on the dealer installed 70cc kit that maintains the full factory warranty (I have around 1 year and 9 months left) and has been proven with their shop scoot that has the same kit. Will post the total price with the break-down when it gets done. Still gotta do something with the seat and the rear shock, but now I will be able to hit bumps going faster and get bucked/smacked harder! Going to be weird having someone else do the bbk because I have built/tuned many motors BUT it will be nice still having a warranty. Keep everyone posted. Oh, going to start collecting some data points from my stock motor first as the bbk will be around 2 weeks away. Operating temps, compression, rpm's and I might do a lambda check also just to have them. Also getting the old parts back. Always save the old stock parts if they are still good.
  Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:00 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.