roketa 250cc belt replacement

shankldu · 08-05-2014, 07:52 PM

what is the replacement interval i just bought 1 with 4600 miles and seems to run great but seem to lose power at top end , im guessing its the belt .

cheapeto · 08-06-2014, 07:58 AM

It's hard to give a certsain number to belt life, was it a good quality to start off with? Again hard to say.
Get a good quality belt, and consider roller weights, then you can dial in to your needs for where you want your power at.
Fast out of the hole, lighter weights.
More top end, is heavier.
Or you could simply drill out the ones you got, and play with them, tuning as you go.
I added sliders to my scooter, reducng from 26 gram rollers to 20 gram sliders.
Some mix up half sliders and half rollers.
While you change your belt and rollers, blow the dust and dirt from your clutch bell, it will love you for that.

bhinch · 08-07-2014, 06:37 PM

I have over 11000 miles on my scoot and it has the orginal belt and going strong. You may need to adjust the valves.

08-06-2014, 07:58 AM	#2
cheapeto Join Date: Jul 2008 Location: York PA Posts: 339	It's hard to give a certsain number to belt life, was it a good quality to start off with? Again hard to say. Get a good quality belt, and consider roller weights, then you can dial in to your needs for where you want your power at. Fast out of the hole, lighter weights. More top end, is heavier. Or you could simply drill out the ones you got, and play with them, tuning as you go. I added sliders to my scooter, reducng from 26 gram rollers to 20 gram sliders. Some mix up half sliders and half rollers. While you change your belt and rollers, blow the dust and dirt from your clutch bell, it will love you for that. __________________ Ride For Kids.org
	0