250cc won't idle

joshuah459 · 10-26-2018, 11:55 AM

My roketa 250cc scooter won't idle. If you keep it above idle speed it seems to do fine. Any suggestions on where to start with this? It doesn't look like my car. Has a adjustment screw of any kind.. are there any vacuum diagrams around?

kz1000st · 10-26-2018, 08:37 PM

Check for a cracked intake manifold or vacuum line.

joshuah459 · 10-27-2018, 01:14 AM

Ive done that. It seems that some of the egr system is missing. the charcoal canister is gone, but there's a bunch of hoses heading to where it should be. Do these carbs have any adjustment settings besides the throttle cable screw? Is there a way to bypass the EGR safely?

casey360360 · 11-15-2018, 02:54 PM

Charcoal can and EGR on a carbureted scooter? That doesn't make a lick of sense. Take some pictures of what you're looking at, I'll do some more digging into finding a diagram for you.

Quote:

Originally Posted by joshuah459

Ive done that. It seems that some of the egr system is missing. the charcoal canister is gone, but there's a bunch of hoses heading to where it should be. Do these carbs have any adjustment settings besides the throttle cable screw? Is there a way to bypass the EGR safely?

Sent from my LGL158VL using Tapatalk

casey360360 · 11-15-2018, 02:57 PM

Quote:

Originally Posted by casey360360

Charcoal can and EGR on a carbureted scooter? That doesn't make a lick of sense. Take some pictures of what you're looking at, I'll do some more digging into finding a diagram for you.

Sent from my LGL158VL using Tapatalk

After one more page of digging, your bike uses a Linhai VOG260, so it doesn't have EGR or a charcoal canister from the factory. There should be a PCV nipple on the head that routes to the air cleaner, I'm assuming that's what you're referring to?

Sent from my LGL158VL using Tapatalk

Gene563 · 11-21-2018, 08:09 AM

There's probably an air/fuel mixture screw that's blocked off. When I did my PDI on my 150, I open the cover on mine. I always had to run mine on the rich side to keep it idling.
Perhaps there might be a Youtube video on the subject.?.

10-26-2018, 08:37 PM	#2
kz1000st Join Date: Oct 2008 Location: Hyde Park, NY Posts: 1,058	Check for a cracked intake manifold or vacuum line. __________________ 2008 Eagle Milano 150- 9,679 miles 2009 Honda Rebel 250- 10,434 miles 2009 CF Moto Fashion- 16,023 miles 2009 MC-114 50cc Cub Clone- 4,317 miles twowheeler.yolasite.com/ That's 30,049 China Scootin miles and Counting.
	0

11-21-2018, 08:09 AM	#6
Gene563 Join Date: May 2015 Location: Lanoka Harbor, NJ Posts: 63	There's probably an air/fuel mixture screw that's blocked off. When I did my PDI on my 150, I open the cover on mine. I always had to run mine on the rich side to keep it idling. Perhaps there might be a Youtube video on the subject.?.
	0