Toolkit addons - suggestions?

[saferider1]

I know toolkits are good insurance. I already used my WD-40 to get out of a bind when my key wouldn't turn in the ignition after fueling up (by the way I have CorrosionX on order to fix that problem permanently!)

I need some help whittling down and beefing up my toolkit and spare parts on board my scooter. I have a 2012 Taotao ATM150-A 150cc. Here's what I've seen on scootdawg threads as possible addons to what I have already. Opinions on these items? Any other suggestions? Thanks for any advice.

Items I've read about and am considering adding:

impact driver
13" 1/2" drive breaker bar
strap wrench
wire crimping tool
electrical: 16 gauge wire, butt connectors, quick connects, etc.
feeler gauge
tire repair kit
bike pump
spare bulbs
spare fuel filter
extra vacuum line and gas line
spare regulator
spare CDI box
spare ignition coil
spare throttle cable
spare drive belt

Here's what I have in my under-seat compartment so far. It seems kinda heavy. Any ideas on whittling it down? As it is now, the compartment is full with what I have listed.

1) FIRST AID KIT
2) RAIN JACKET/PANTS
3) BUNGEE CORD NET
4) TOOLKIT & SPARE PARTS: Currently weight: 13 lbs
My tool bag is a kid's insulated 2-compartment lunch backpack (see photo)
-----------------------------------------------------------
Mechanix gloves
2 rags in ziplock bags
0.2 oz green loctite
0.2 oz blue loctite
1.25 oz white lithium grease
0.5 oz graphite oil
3 oz WD-40 spray
LED flash light
small ziplock bag of extra fasteners M6, M8, screws, etc.
roll of steel wire
zip ties
electrical tape
duct tape
teflon tape
-----------------------------------------------------------
utility knife
tire pressure gauges x2
needle nose pliers
gerber 'suspension' multi-tool
pliers
channel lock pliers
small vice grips
wire cutters
piece of coat hanger with hook-shaped end for grabbing wires
bit driver set with various phillips tips, 1/4" drive tip
phillips screwdrivers 4" x2
flathead screwdriver 6"
flathead screwdriver 3"
-----------------------------------------------------------
metric hex key set
hex key for Motobatt battery terminals
-----------------------------------------------------------
crescent/box wrenches: 8mm, 10mm, 12mm, 13mm, 14mm, 15mm, 17mm
adjustable wrenches: 10", 8", 5"
-----------------------------------------------------------
3/8" drive ratchet
5/8" spark plug socket
2" extension
3/8" drive hex bits: 4mm, 5mm, 6mm, 7mm, 8mm, 10mm
3/8" drive sockets: 8mm, 10mm, 12mm, 13mm, 14mm, 15mm, 17mm
-----------------------------------------------------------
1/4" drive ratchet
1" extension
2" extension
3" extension
5" extension
1/4" drive sockets: 8mm, 10mm, 12mm, 13mm, 14mm
1/4" drive deep sockets: 8mm, 10mm, 12mm, 13mm
-----------------------------------------------------------
1/2" drive 21mm socket
(1/2" drive torque wrench at home + 25" breaker bar at home)
-----------------------------------------------------------
2 spare fuses
spare rubber dampers for trunk
spare NGK CR7HSA (4549) spark plug