need your expert opinion

[bloodymomo]

I have a gy6 50cc with the 100cc bbk on it running uni filter. I'm buying a new carb new jets, new exhaust. Variator cdi wire. Blah blah.. I weigh 320lbs and it is moderately hilly where I live. In your expert opinion what size roller weights will wotk best for my size. Also I do have quite a long ride every day or so just so u know. I also have tge red and yellow torque springs and I'm buying blue and yellow clutch springs. So yea if u need any more info please ask. I really am looking forward to hear what gram rollers ill need.
thanks guys!

[millsc]

what gram torque spring and clutch spring the color don't matter i run 1.5k torque spring does me good uphill holds the rpms up when going up a hill i'm almost 200 pounds and run a 9.5 and a 9 gram mix dr pulley slider, but i have a koso variator which is lighter. If you have a 1.5k torque spring run some 5 or 6 gram sliders with it since you weigh more. If you don't have the 1.5k spring i suggest you get it.

[Lefty]

Normally the Contra Springs(Torque Springs) that the dealers sell are rated as such:
Blue Color are-1000 rated springs they are just a little stronger than the OEMs.
Yellow Color are-1500 rated springs
Red Color are -2000 rated springs
Lefty

[bloodymomo]

Also this is the carb/ intake / cdi n wire set I want to order...
http://www.ebay.com/itm/120841293411...84.m1438.l2649
Will the intake be right size to bolt on my 50cc? I've heard of people running this setup on their 50cc scoots.. will it work for mine? Gy6 50cc w/100cc bbk

[millsc]

no its too big the 24mm carb works good for my setup up, anything over that is too much.

[millsc]

I'm gonna put a 100cc kit on my roketa tomorrow and i'm going to try a 24mm carb with it, it works with my 52mm kit quite well. I run the 150cc stock manifold no spacer gonna do the same with this kit also, gonna try jets 95-98.