|
|
07-12-2016, 12:07 AM | #1 |
Join Date: Feb 2014
Location: las vegas
Posts: 100
|
Easy, if you bought a mianifold and it's too short you probably have a bn157qmj engine, they sell the right "raised" manifold at scrappydog scooters, any gy6 24 or 26mm carb will work fine. Upjet your carb 1 size and run a performance foam air filter, it will squeeze a bit but it will fit in your engine mount. 42mm foam filter, all this stuff is available at scrappy, check out this link and see if this is the right manifold, about 6 parts down. http://www.scrappydogscooters.com/GY..._BN157QMJ.html
__________________
2012 Jonway X 44mm Hoca crank 52mm Hoca big bore MMS big valve head raised ports, polished, milled .023 Hoca 26mm carb NCY titanium valve springs NOS wet nitrous system Holley fuel pump MMS variator Naraku CDI HT coil 4' Wheelie bar MMG stainless slip-on exhaust NGK "11" spark plug UNI filter 2014 Icebear Maddog too much to list http://mmsscooters.com |
07-12-2016, 01:24 PM | #2 |
Join Date: Dec 2014
Posts: 738
|
In Melbourne Florida , they have two places-Bike Strippers & Harley Strippers. They work in conjunction with E-Bay. You might give them a call. It might not work but it's worth a try! Irish
|
07-12-2016, 01:43 PM | #3 |
Join Date: Nov 2015
Posts: 28
|
Thanks Irish I tried a few places that sell or used to sell this scoot but I haven't even gotten any call backs so I'm not so sure. I wish I could just find stock replacements for everything hahaha I'm not very mechanical.
__________________
|
07-12-2016, 08:30 PM | #4 |
Join Date: Oct 2008
Location: Hyde Park, NY
Posts: 1,066
|
www.partsforscooters.com is my go to for parts. Matt Maney is the manager there and knows tons. Chat or call them.
http://www.partsforscooters.com/Stre...e=41%2C60%2C81
__________________
2008 Eagle Milano 150- 9,679 miles 2009 Honda Rebel 250- 10,434 miles 2009 CF Moto Fashion- 16,023 miles 2009 MC-114 50cc Cub Clone- 4,317 miles twowheeler.yolasite.com/ That's 30,049 China Scootin miles and Counting. |
07-12-2016, 01:41 PM | #5 | |
Join Date: Nov 2015
Posts: 28
|
Quote:
I'm not sure what engine it is, but that manifold isn't the one. The one I need looks exactly like one for a gy6 but it's just a hairwider where it bolts down and a bit longer where it meets the carb, here's a few photos of the manifold and the engine. http://imgur.com/qmA0XFA http://imgur.com/q9Iwmox So 24-26mm on the manifolde side but what about on the air intake side? 42mm? About the filter, can I just cut out the old paper filter and fit foam in there so I can maybe not have to upjet the carb but maybe just adjust the a/f mixture screw on the carb to compensate for the extra air flow? I'm not experienced with taking apart carbs and jets so I'm trying to do this with as little adjustments as possible.
__________________
|
|
|
|