|
|
|
04-13-2013, 11:32 PM
|
#1 |
 Join Date: Aug 2012
Posts: 51
|
Scooter Valve adjustment wont take?!?!
Ok, so I know how to do the valve adjustment....
But when I do it... If you turn the motor over at all, they loosen up or get really tight. I've attempted 12 times now. Have no clue what to do Anyone know what I could be doing wrong? Need new valves? The scoot really needs the adjustment, If I just leave it like that, wont run for crap, and it just tick like crazy |
|
|
04-14-2013, 01:55 AM
|
#2 |
 
Join Date: Sep 2011
Location: staunton va
Posts: 319
|
Will you want it where the lobes dont make contact with the rocker arms and if you have all your timing marks lined up your good to go.timing marks cam+big hole on top two small holes lined up with the top of the head, flywheel t-marl lined up with the mark on the case
images (1).jpg images.jpg
__________________
   2010 Cpi Oliver 70cc, naruku trans kit, downhill handle bars, tecnigas rsll pipe, s6 4g rollers, Vento R4 with 90cc 1e52qmf technigas next r 100cc pipe Naruku, 21mm race carb, s6 4.5 g rollers 
|
|
|
|
04-14-2013, 11:55 AM
|
#3 |
|
Join Date: Jul 2012
Location: Miami, FL
Posts: 389
|
you turn over the engine, to see if the adjustments aren't too tight.
When you ride, you shouldn't hear clicking sounds, but neither should the exhaust sound too smooth (you'll notice an MPG drop, when the valves are adjusted too loose; eg: adjustment is 0.010 instead of 0.005")
__________________
   
|
|
|
|
04-15-2013, 09:40 AM
|
#4 |
Join Date: May 2012
Location: missouri
Posts: 164
|
hold the adjuster nut with a needled nose and snug the nut fairly tight with a 9mm wrench it shouldn't move if you get it nice and snug, if it does get a set of new rocker arms what size are they i have several sets
__________________
B.A.M.F. tapout scoot 24mm carb 150cc intake performance exhaust A9 cam hoca big valve head 16/50 gears 9.25 gram dr pulley sliders koso variator 1.5k torque spring orange coil orange unlimted cdi uni filter gates premium belt 2012 taotao vip cy50a scrappys 110cc big bore kit 52mm "88cc" 100 main jet 38 idle iridium plug custom paint, leds and decals alarm system naraku hd crankshaft |
|
|
|
05-02-2013, 04:30 AM
|
#6 |
Join Date: Mar 2013
Location: los angeles
Posts: 43
|
You wanna make sure your timing is lined up right that would be when the big hole on the cam is on the top. I had the same problem the first time i timed my scooter. i had the timing marks lined up on the rotor but the engine wasnt turned to tdc. It makes a world of difference when you get it right.
__________________
My advice to people today is as follows: if you take the game of life seriously, if you take your nervous system seriously, if you take your sense organs seriously, if you take the energy process seriously, you must turn on, tune in, and drop out. ''Timothy Leary'' |
|
|
 |
|
|
Linear Mode
