Register FAQ Community Calendar Today's Posts Search
Go Back   ScootDawg Forums > Performance :: Maintenance :: Technical > 125cc - 249cc
Reply
 
Thread Tools Search this Thread Display Modes
Old 04-07-2018, 08:44 AM   #1
GrouchyOle'Man   GrouchyOle'Man is offline
 
Join Date: Sep 2017
Location: NE Central Florida
Posts: 37
Hi rks That was my thought as well, that the crank sprocket would be like the sprocket on the cam; with the more pointed teeth. The miss could be electrical. I am using new CDI, COIL, PLUG. It is somewhat strange because if you keep feathering the throttle on it, eventually it clears up and can run WOT or near WOT with no miss. I have not been able to pinpoint the problem (fuel delivery or electrical) as the engine has been doing this ever since I got it running. It was starting right up but with a noticeable miss at idle and at mid throttle, it would bog (not die), and miss. It did not backfire until I installed a new performance muffler here recently. I have checked the tightness of the coil wire and plug boot. I will unscrew it and check it again however.
Carb is new and clean, stator is new, coil and plug cap are new. Plug is new. Head gasket is new. Cylinder gasket is also new. So, I am currently stumped as to what the CAUSE is...but you may be right about the intermittent electrical problem. ALL THE Ground wires I have found are tight, clean, and secure. Any other ideas??
As far as electrical problems go, there WAS no voltage to the fuel enricher (when running), or the horn. I do not think the enricher is really needed down here, and I have plugged off the enricher port on the carb.



Login or Register to Remove Ads
  Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:50 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.