|
|
09-09-2017, 12:29 PM | #1 |
Join Date: Jul 2017
Posts: 12
|
These are one of the ones that revzilla has :
https://www.revzilla.com/motorcycle/...ed-turn-signal and amazon has others too. Have you used aftermarket handlebars on your scoot and how did you install them ? Scott |
09-10-2017, 02:27 PM | #2 |
Join Date: May 2017
Location: Norfolk, VA
Posts: 531
|
If you are talking about a bare bar conversion, they can be a bit of a pain in the butt. First, you need to find a stem thats tall enough to clear the panels. Then, choose bars wisely as the wrong height or width can require a change of brake cable and brake hose. Finally, dash board options. Vapor and Koso make nice ones. If you reuse the original controls that saves a bit of time and trouble, just have to drill set holes for the controls so they stay put. If you scoot already has bare bars then the manufacturer did most of the hard work for you. To run the bar end LED's, you should be able to use your stock bars. Just get creative with wiring and drill out any bar end weights that might be in you OEM bars, as not all bars have them.
|
09-10-2017, 07:19 PM | #3 | |
Join Date: Jul 2017
Posts: 12
|
Quote:
Instructions say bolt on, but tempted to use glue too Scott B |
|
09-10-2017, 09:52 PM | #4 |
Join Date: May 2017
Location: Norfolk, VA
Posts: 531
|
For the price just experiment! If they say bolt-on then I guess they just bolt-on. I personally have never used bolt-on grips. It says 22.2 motorcycle grips, but the throttle side is a bit larger. Pretty sure they would work without being glued on. I use bmx grips, and stretch the throttle side over the throttle tube. Have a soft spot for Da Kind Ganja drips. Soft, comfy and unique. Just order the bolt-on grips and see how they work out. I have spent far more on stuff that did work as advertised and much more on stuff that didn't. I have a set of bars from a parts scoot in the garage and they have bolt-on grips but I didnt install them and have not had a reason to remove them. They have always stayed put for the prior owner. Cant reach him to ask if he also glued them, he is in China at the moment.
|
|
|