Register FAQ Community Calendar Today's Posts Search
Go Back   ScootDawg Forums > Performance :: Maintenance :: Technical > 50cc - 124cc
 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 11-11-2013, 10:36 PM   #3
Lefty   Lefty is offline
 
Lefty's Avatar
 
Join Date: Jan 2013
Location: midwest
Posts: 93
Make sure the KILLSWITCH is on the run position. Also check for spark on the frame.
If it Sparks on the Frame but not the motor then your ground from the frame to the motor is bad.
If it doesn't spark on the frame or the motor then start checking for:
a. Bad Boot cap
b. Boot cap not making good contact inside the Coil wire(Unscrew it and cut off 1/2 inch off the COIL wire and screw the Boot Cap back on.
c. Check the Coil wire at the COIL itself some screw onto the coil as well make sure it is nice and tight screwed on.
d. Check the wires going to the COIL make sure they are not loose or one came off and they are on nice and tight and not touching one another.
E. After that It could be the COIL is actually bad or the CDI or the Pick Up Coil or Stator.

To Test for "E" you need a VOLT METER or start replacing parts starting with the COIL then the CDI then the PICK UP COIL then the Stator.
Lefty
__________________

Three Wheels keep me up
You’ll never be old and wise if you weren’t young and crazy



Login or Register to Remove Ads
  Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:27 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.