Register FAQ Community Calendar Today's Posts Search
Go Back   ScootDawg Forums > Performance :: Maintenance :: Technical > 250cc +
 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 06-19-2014, 03:24 PM   #2
bnc   bnc is offline
 
Join Date: May 2014
Posts: 49
There is a drain bolt for the coolant under the belt case air cleaner plastic cover on the left side. The bolt is slightly to the left of the center line for the cover and just to the right of the carburetor hose that attaches to the front of the cover.

Over at the Yahoo Reflex group there was a way to replace the gear oil without taking the left crankcase cover off. I only recall it had to do with forcing the oil back up the drain opening. The oil from Honda comes in a squeeze tube and I used the whole tube so I suppose it could be done that way. I was replacing the belt so I just did it the way the service manual describes.

You have a Reflex now?
  Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:49 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.