|
|
|
Thread Tools | Search this Thread | Display Modes |
|
06-30-2016, 06:52 PM | #1 |
Join Date: Jun 2013
Location: Minnesota
Posts: 73
|
On the giving it gas at idle. I agree with regard to a carb/jetting/rich lean issue, but look to see if you have the PAIR system set up. I had a similar Roketa and had the same issue. Once I removed the PAIR system and totally simplified the fuel and vacuum lines the problem completely went away. Also, I'd check for a vacuum leak.
|
06-30-2016, 09:00 PM | #2 |
Join Date: May 2015
Location: Lanoka Harbor, NJ
Posts: 63
|
Good point, Ebuddy.
I didn't think of the emissions stuff. I had gotten rid of the evaporative system and bypassed the PAIR system (removed later) during the PDI. |
07-02-2016, 05:21 AM | #3 |
Join Date: Jul 2011
Location: Connecticut
Posts: 493
|
Check valve adjustments and compression.
__________________
2011 Roketa MC-23-150 4T 150cc 157 qmj 24mm carb w 115 main jet and paper cone air filter Manual petcock w Tygon fuel lines Scrappy Dog Scooters Retro-slash stainless straight-thru exhaust RED spring clutch Adjustable CDI (brand unknown, it's blue and red and works great!) KOSO high performance variator w 12g sliders Gates Powerlink 835-20-30 belt GPS verified 65mph on flats. |
|
|