Register FAQ Community Calendar Today's Posts Search
Go Back   ScootDawg Forums > Performance :: Maintenance :: Technical > 250cc +
 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 04-16-2014, 07:47 PM   #7
tpdavis   tpdavis is offline
 
Join Date: Apr 2014
Posts: 9
Thumbs Up SUCCESS! (I think)

OK, I take apart the front wheel (tip: Stuff something between the plates in your disc brakes before completely removing the wheel--hardest part of reassembly was trying to get the disc back in the pads). Nothing seemed wrong with the rocker. But as I was down there I moved the fork around and heard a plastic sounding pop; then the wheel wouldn't turn to the right without a lot of force. Didn't do it all the time. AHA! So I remove the front underfender and what the manual calls the fork fender. The fork fender rides on the underfender. What I found was the top side of the fork fender had been chipped away and deformed. I don't know by what since after I removed it there wasn't anything that looked like it would get in the way. In any case, I left off the fork fender as well as the underfender and I'll see if the loss of steering occurs again. If not, then I'm good since I rarely ride on wet roads so no real need for those two extra pieces of plastic.

Thanks, all, for letting me whine and for the helpful tips.
  Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:05 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.