|
|
|
Thread Tools | Search this Thread | Display Modes |
09-09-2017, 08:28 AM | #5 |
Join Date: Dec 2013
Location: Western New York
Posts: 454
|
Easy enough to pull fuel line from barb on the carb, then open your manual petcock and check the flow rate. Could be some crud in the tank, restricting the flow.
I assume that you adjusted the valve gaps after installing your top end kit. As Roscoe eluded.......no vac lines attach to the valve cover.....that is a breather hose, and must remain open. |
|
|