![]() |
|
![]() |
#2 |
![]() Join Date: Apr 2014
Location: Las Vegas, NV
Posts: 32
|
I'm not sure about you're model, what engine does it have in it? there's youtube vids about changing the belt on a GY6/139qmb.. check them out. THere are a few places to get parts... I get mine on http://www.scrappydogscooters.com/
__________________
D_Whitney 50cc Taotao VIP 139qmb, 18mm carb |
![]() |
![]() |
#3 |
![]() Join Date: May 2013
Location: Indiana
Posts: 56
|
Best would be Yamaha but would probably be the most expensive. If you know the belt size you can go to Napa or someplace and cross reference and get a gates belt. Also as stated above get one online.
|
![]() |
![]() |
#4 |
![]() Join Date: Sep 2012
Location: West Haven CT
Posts: 1,165
|
Hi
Measurements for your belt are Belt Length: 29" Top Width: 16mm Bottom Width: 12mm Or go to your local Yamaha dealer and tell them you want Yamaha part number 3AA-17641-00-00 V-BELT Hope that helps Take care and ride safely Yours Hank
__________________
Duty, Honor, Country. Those three hallowed words reverently dictate what you ought to be, what you can be, what you will be. Douglas MacArthur |
![]() |
![]() |
#6 |
![]() Join Date: Sep 2012
Location: West Haven CT
Posts: 1,165
|
Hi
Happy to be of assistance Take care and ride safely Yours Hank
__________________
Duty, Honor, Country. Those three hallowed words reverently dictate what you ought to be, what you can be, what you will be. Douglas MacArthur |
![]() |
![]() |
|
|