Scooter HID Xenon Conversion Kit?

rlshepard · 03-18-2015, 08:56 PM

Hey Dawgs,

Been looking at lights, kinda thinking HID so that I can see and be seen. the lancer uses an H4 Bulb (I think).

Any body have any experience with the Kit sold on http://www.scrappydogscooters.com/COMMON_PARTS.html ?

I'm confused because it says it has high and low beam in one socket. My Lancer currently has a high beam bulb in one socket and the low beam in another.

Thoughts? Comments? Ideas?

Thanks

scosgt · 07-09-2015, 07:46 PM

I did it on both my SYM HD 200's. One bulb.

blueboy5000 · 07-10-2015, 12:58 PM

I also ride an mc-23, I feel your pain.

I think I'm gonna try this.

scosgt · 07-10-2015, 06:40 PM

Use a kit with slim ballasts and a "high" halogen, if your type supports it. That gives you an emergency light if the HID blows out some night.

urbanista · 08-04-2015, 08:51 PM

Has anyone tried out LED bulbs? Are they worth the cost?

Also, is there a real difference in power draw? My Roketa 150 came worth, I believe, 35w headlight bulbs.

If I were to switch to LED, does this mean I can get the same number of lumens from, say, a 20w LED bulb? Or could I get even more brightness by going up to a 40w bulb (assuming the scooter puts out enough power).

Any info would be much appreciated.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-09-2015, 07:46 PM	#2
scosgt Join Date: Jul 2015 Posts: 23	I did it on both my SYM HD 200's. One bulb.
	0

07-10-2015, 06:40 PM	#4
scosgt Join Date: Jul 2015 Posts: 23	Use a kit with slim ballasts and a "high" halogen, if your type supports it. That gives you an emergency light if the HID blows out some night.
	0