|
|
|
09-28-2013, 02:30 PM
|
#1 |
 Join Date: Sep 2013
Posts: 2
|
GY6 150cc bogs/dies under throttle
I would love some help on this. It idles just fine, but when I give it gas, it bogs and eventually dies. I changed the spark plug and put new fuel in it, but it's still not working.
Here is a video of what is happening. Thanks! |
|
|
09-28-2013, 02:38 PM
|
#2 |
 
Join Date: Sep 2012
Location: West Haven CT
Posts: 1,165
|
Hi
Welcome aboard Pleased to meet you I would start by tuning your carburetor http://scooter.wikia.com/wiki/Tuning_a_carburetor Then i would check your valve clearance Take care and ride safely Yours Hank
__________________
 "4wheels move the body 2 wheels move the soul"Duty, Honor, Country. Those three hallowed words reverently dictate what you ought to be, what you can be, what you will be. Douglas MacArthur |
|
|
|
09-29-2013, 08:47 PM
|
#3 | |
|
Join Date: Sep 2013
Posts: 2
|
Quote:
If I do, where is the best place to get one? I've been reading about "upgraded" versions, I'm wondering if that is the best bet? |
|
|
|
|
07-11-2014, 05:34 PM
|
#4 |
|
Join Date: Jul 2014
Posts: 2
|
I am having the same problem with a Jonsway 150. Spark plug is very black and looks too rich. I am leaning toward a firing problem. Never had problem with the carb before and this is usually an air in leak on these scooters but the black plug would suggest otherwise. What did the plug you removed look like? Light brown or black?
|
|
|
|
07-12-2014, 02:09 PM
|
#5 |
|
Join Date: Jul 2014
Location: Raleigh, NC
Posts: 11
|
the idle jet is clear but the main jet is clogged..I had the issue in reverse a pita to clean, i used the strands from a bicycle cable in a drill before it worked to get it open finally..if spark plug is black, it could be the wrong plug, a weak coil, clogged air filter or the jet is too large.
|
|
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
