![]() |
|
![]() |
#2 |
![]() Join Date: May 2011
Location: Nanty Glo, Pa.
Posts: 163
|
I have a 250cc roketa, set mine at 28.
|
![]() |
![]() |
#4 |
![]() Join Date: Jul 2013
Location: St. Pete, FL
Posts: 12
|
I just bought a new 50cc. It didn't always want to stay at idle, so I bought a new NGK Iridium plug and filled up with premium gas... I get home and gap the new plug to .0265.... So, I pull the what I thought was a Chinese plug, but it was a NGK C7HSA! I should have had more trust in my bike dealer :P Anyway it was gapped at .028... I did the swap out anyway and no longer have any problems staying at idle
![]() ![]() -Shane
__________________
2013 TaoTao ATM50-A1 (60cc) Valve Lash at .003" in-out 20mm CVT Carb Huge fuel lines and filter NGK CR7HIX Spark Plug Stock Air Box (Pulled Plug) Stock Exhaust Pirelli SL26 3.50-10@46 PSI I can bury the Needle, Fast... |
![]() |
![]() |
#5 |
![]() Join Date: Sep 2013
Posts: 20
|
theres a 3 prongs electrode plug on ebay somewhere going at $4/piece+s/h... wonder if it really helps at all or just another marketting scheme
http://www.ebay.com/itm/251206520821...84.m1438.l2649 |
![]() |
![]() |
#6 |
![]() Join Date: Jan 2010
Posts: 139
|
Multi-prong plugs are a marketing scheme. They actually reduce performance because all those prongs mess with the flame propagation in the cylinder.
The best right now are iridium plugs. The fine point maintains a hotter spark without having the issues of having a hot temperature range plug like possible pre-ignition from the hot ceramic. Best of both worlds. |
![]() |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|