Register FAQ Community Calendar Today's Posts Search
Go Back   ScootDawg Forums > Performance :: Maintenance :: Technical > 50cc - 124cc
 
 
Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 05-10-2024, 11:47 AM   #1
roberto188   roberto188 is offline
 
Join Date: May 2024
Posts: 2
Electrical Issue on 50cc Chinese Scooter

My little 50cc Chinese scooter will not charge the battery. It kick starts just fine and runs just fine, but the battery will not charge. I disconnected all my wiring, installed a new regulator and started my scooter. The output of the regulator was reading around 14-15 volts. Once I started plugging in my other components the voltage output from the regulator went to 0. I believe it burned the regulator out as it was very high when I took it out. I disconnected all my wiring again, installed the old regulator and started the scooter. The regulator was putting out only around 11 volts, 12 max, with high RPMs. I then plugged my other wiring back in and the output of the regulator dropped to 7 volts. I check the stator output and it reads about 20-30 volts at idle and 40-60 volts at high RPMs. Does anyone have any idea what the problem could be? Is my stator just undersized to power all my accessories and charge the battery, or is there maybe a short somewhere?



Login or Register to Remove Ads
  Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:17 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.