|
08-31-2014, 02:15 PM | #1 |
Join Date: Aug 2014
Posts: 5
|
Tao Tao 49cc ATM50-A1, noob hardware question
I'm wondering about replacement screws for the plastic body pieces, battery compartment door, and light lenses on my 2102 TaoTao ATM50-A1. A number of the ones on my used scoot have gotten a bit rusty, and I'd like to put some new ones in before they completely rust out.
Does anybody have any advice on where to find a list of screw parts or substitutes, or best way to approach this sort of improvement? |
09-01-2014, 11:58 PM | #2 |
Join Date: Sep 2013
Location: VA
Posts: 37
|
I would take the screws and head to the local hardware store and match them up.
|
09-03-2014, 10:37 PM | #3 |
Join Date: Feb 2014
Location: las vegas
Posts: 100
|
the machine threaded screws are either m5x1.25 or m6x1.25, those are the most common, the phillips screws are about 5 different sizes and lengths on a bike
__________________
2012 Jonway X 44mm Hoca crank 52mm Hoca big bore MMS big valve head raised ports, polished, milled .023 Hoca 26mm carb NCY titanium valve springs NOS wet nitrous system Holley fuel pump MMS variator Naraku CDI HT coil 4' Wheelie bar MMG stainless slip-on exhaust NGK "11" spark plug UNI filter 2014 Icebear Maddog too much to list http://mmsscooters.com |
09-28-2014, 09:26 PM | #4 |
Join Date: Aug 2013
Location: Murikkka
Posts: 14
|
Ace hardware has the best selection of screws and bolts, hands down. Take them there and you will find replacement
|
|
|