|
|
03-11-2014, 06:38 PM | #1 |
Join Date: Mar 2014
Posts: 1
|
2008 Roketa repair help
My husband bought a Roketa MC 54 250B and the rear tire blew about 10 minutes into our ride home. We are replacing it and while putting the bike back together the two brackets where the bolts that hold the muffler and swing arm go sheared off. Both of them. He is not mechanically inclined and I am only a bit more so than he, but I call everything thingy. WHAt is the piece called. I have the very distinct feeling it's the engine or at least the engine housing, but I am not certain. I am attaching two photos. Please tell me we do not have a very heavy $800 paper weight.
|
03-12-2014, 02:38 PM | #2 |
Join Date: Mar 2013
Location: illinois
Posts: 65
|
Possibly, but first you may want take it to a welding shop, one that can weld aluminum, and see if they can repair that area. good luck.
|
03-13-2014, 04:13 PM | #3 |
Join Date: Jun 2013
Location: Columbus, Ohio
Posts: 50
|
Yea
That be the engine block But, like 4get said, a good aluminimuminumminn welder should be able to weld the busted part back on, or, weld a clump (official welding term) in there and then tap it. or make a new muffler bracket and attach it somewhere else I would say that bolt on the left, but that looks like a drain plug let us know what happens
__________________
|
03-13-2014, 08:54 PM | #4 |
Join Date: Mar 2014
Posts: 34
|
As a welder myself the easiest way would be to cut the leftover stub off and weld a nut that matches the bolt in its place.
Change your oil immediately after, the heat from the welding will ruin the oil. |
03-14-2014, 12:22 AM | #5 |
As a welder also, I second ellis' solution.
__________________
2007 Sportiva Falcon GY6 150 4T 7,200+ Mi. 68 ( GPS Verified ) 76 MPG Few Mods, Lots-O-Tweaks 2003 Vento Zip R3i TurboCam 50cc 2T 8,500+ Mi. 62mph ( GPS Verified ) 90 MPG Seriously Modded Check out the new group for the Mountain Area! http://www.scootdawg.net/group.php?groupid=4 |
|
|
|