auto enrichener

[dwint51]

I replaced my enrichener and still no high idle at start up.would this be electrical problem?

[dwint51]

Originally Posted by dwint51

I replaced my enrichener and still no high idle at start up.would this be electrical problem?

for some reason it is faster now

[chopyouup]

Originally Posted by dwint51

for some reason it is faster now

No sounds like an air fuel mixture problem or a jet issue.

[dwint51]

I cleaned the carb.i have a good tan plug and its running better than ever.i just went up a hill at 22 and usually 15.i don't get it but it needs to be fixed before the cold weather comes

[chopyouup]

Originally Posted by dwint51

I cleaned the carb.i have a good tan plug and its running better than ever.i just went up a hill at 22 and usually 15.i don't get it but it needs to be fixed before the cold weather comes

Most people wouldn't be complaining! But OK if I get what your saying you yhijkvthe scooter is over working itself, the way this happens is usually running to lean (to much air) take a look at your spark plug if its whiteish (as opposed to gray to brown or charcoal) you may be running lean.

[dwint51]

looks tan to me.where do the wires go that the enrichener plugs into?is it a 12 volt hot wire.when I first start it it smokes then stops when warm.that would make me think its working

[chopyouup]

Originally Posted by dwint51

looks tan to me.where do the wires go that the enrichener plugs into?is it a 12 volt hot wire.when I first start it it smokes then stops when warm.that would make me think its working

You can try unplugging the enricher. I really don't know where it goes, I assumed it goes to the CDI though. There are a few wiring diagrams for gy6 online (do a google search).

I still don't get what exactly your issue is though.

[dwint51]

I guess I don't have any issues except I hate when things don't work the way they are suppose to

[Bvance554]

What are you wanting it to do?

[dwint51]

give a high idle till its warm so I don't have to hold the throttle.i paid for a new one I expect it to work

[Bvance554]

Have you tried turning in the screw attached to the throttle cable a little? the one that the linkage rests against and holds the idle?

[dwint51]

ill try it a little more