|
|
|
|
|
09-07-2016, 06:24 PM
|
#1 |
 Join Date: Jul 2016
Posts: 18
|
Exhuast for a 50 to 10cc 139qmb
How important is it to replace the exhaust with a ""performance" exhaust afyer the 100cc upgrade?
As well, via ebay. What would be a good pick for one? Other things ive done 20mm carb, cdi box and cable, 9g slider (seeing what hapens after install) 1500 rpm clutch/kontra spring, open element filter. Dunno what jet is in the carb as of now. Will need advice on carb adjusting later after new parts are in.
__________________
Smm jazzie gy6 , from 50 to 100cc Orange black cdi cable Purple racing cdi box 20mm carb jets unknown as of now Open element air filter Mirror stereo system Roller weight nd clutch spring unkown Rider 6 foot 270 pounds |
|
|
09-10-2016, 09:44 AM
|
#2 |
 Join Date: Feb 2015
Posts: 257
|
A standard Chinese made BBK 100 (83cc) upgrade does not need a bigger carb or performance exhaust. In those areas, all it needs is a properly jetted oem carb.
The so called performance CDI modules (blue & orange) and ignition coils are a waste of money and those CDIs can cause damages from over advancing timing at crank time. Too heavy of Engine Variator rollers will cause belt engagement at idle and can cause clutch and belt failure if the driver has to hold it back when stopped @ traffic lights. |
|
|
|
09-10-2016, 01:47 PM
|
#3 |
|
Join Date: Jul 2016
Posts: 18
|
I was thinking of undoing changes andsee how it ran stock. Its been running slow since. After thw 100cc upgrade it ran very well. Glad parts arent exensiv thhough. Been a good learning experiance
__________________
Smm jazzie gy6 , from 50 to 100cc Orange black cdi cable Purple racing cdi box 20mm carb jets unknown as of now Open element air filter Mirror stereo system Roller weight nd clutch spring unkown Rider 6 foot 270 pounds |
|
|
 |
|
|
Hybrid Mode
