Register FAQ Community Calendar Today's Posts Search
Go Back   ScootDawg Forums > Performance :: Maintenance :: Technical > 50cc - 124cc
Reply
 
Thread Tools Search this Thread Display Modes
Old 06-24-2014, 07:00 PM   #1
Red9654   Red9654 is offline
 
Join Date: May 2014
Posts: 8
Exclamation low beams tail light and auto choke don't work

i have a 2014 wolf rx 50. this morning i turned it on and 1 second after it started the low beams, side lights and tail lights went out. i also noticed the auto choke did not shut off after warming up. i flipped the switch for the high/low beams to turn on the high beams and when i did the high beams, side lights and tail light came on. also the auto choke shut off. so i had to ride to school at 530 this morning with the high beams on. when i got home i checked all voltages and they were good at all wires one connectors and they all have continuity. but still only the high beams work. i also noticed when i had the 9 pin plug unplugged by the buttons on the handle bar the side lights would come on but not the head lights. any ideas? i need to fix this asap as this is my only ride to school. thanks!



Login or Register to Remove Ads
  Reply With Quote
Old 06-29-2014, 01:13 PM   #2
nightriderrv   nightriderrv is offline
 
nightriderrv's Avatar
 
Join Date: May 2014
Posts: 13
Check the fuses and that connector to make sure there is no pins pushed out.
  Reply With Quote
Old 07-01-2014, 07:47 AM   #3
blueboy5000   blueboy5000 is offline
 
blueboy5000's Avatar
 
Join Date: Jul 2011
Location: Connecticut
Posts: 493
Check your main fuse wire (primary circuit).

Also check ALL frame grounds.
__________________
2011 Roketa MC-23-150

4T 150cc 157 qmj

24mm carb w 115 main jet and paper cone air filter

Manual petcock w Tygon fuel lines

Scrappy Dog Scooters Retro-slash stainless straight-thru exhaust

RED spring clutch

Adjustable CDI (brand unknown, it's blue and red and works great!)

KOSO high performance variator w 12g sliders

Gates Powerlink 835-20-30 belt

GPS verified 65mph on flats.



Login or Register to Remove Ads
  Reply With Quote
Old 07-03-2014, 03:05 PM   #4
hkpotts44   hkpotts44 is offline
 
Join Date: May 2014
Location: Grover NC
Posts: 25
I'm with Blueboy it sounds like a fuse or a ground. In all of the ones I've messed with a faulty ground was the cause.
  Reply With Quote
Old 07-05-2014, 11:32 AM   #5
Red9654   Red9654 is offline
 
Join Date: May 2014
Posts: 8
it turned out to be a short to ground inside the lightbulb (headlight). i never gave that any thought because i saw the filament was good. that caused all voltage to short to ground. thanks for the help though



Login or Register to Remove Ads
  Reply With Quote
Old 07-06-2014, 01:46 AM   #6
Bvance554   Bvance554 is offline
 
Join Date: Sep 2013
Location: VA
Posts: 37
Off topic, but I always ride with my high beams on.
  Reply With Quote
Old 02-06-2016, 08:07 AM   #7
shadog37   shadog37 is offline
 
shadog37's Avatar
 
Join Date: Feb 2016
Location: PalmBay,Florida
Posts: 5
Hell. You should ALWAYS RIDE WITH HIGH BEAM ON. Its safer and you can see those peskY 'POT' holes. Safe scootin to all
  Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:30 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.