|
12-18-2013, 03:48 PM | #1 |
Join Date: Mar 2013
Posts: 27
|
2008 Shenke 250cc Blown Gaskets?
I posted this thread in the wrong forum before..
So I bought a 2008 Shenke SL250-22 Scoot from a local guy here in Cali. The scooter has 49 miles on it and it was owned by a retired old guy that rode it down to the gas station and back. It has sat for about 4 months. Scooter started right up, ran around the block great. When I picked it up I drove it about 5 miles and stopped and checked things out. Everything looked great. Started again and about 5 more miles down the road I noticed the temp rising up a little. The scooter felt a little sluggish so I pulled over and shut it down. Checked the oil and oil came pouring out of the filler tube. Checked the antifreeze, it was low. Assuming it blew a gasket somewhere and the antifreeze was bypassing into the crank case. Just dropped it off at a local shop for diagnosis. Anyone have any ideas? The scoot only has 50 miles on it. What the heck? |
12-18-2013, 10:48 PM | #2 |
Join Date: Aug 2011
Posts: 538
|
I'm gonna guess, that the top end = head/jug came loose.
|
12-20-2013, 10:13 PM | #4 |
Join Date: Nov 2013
Location: Orlando, Fl.
Posts: 75
|
Oil pouring out fill neck
Good chance that It was only over filled with engine oil. Do a drain and fill.
|
Tags |
blown, cooling, head gasket, oil, overheat |
|
|