Register FAQ Community Calendar Today's Posts Search
Go Back   ScootDawg Forums > Performance :: Maintenance :: Technical > 250cc +
Reply
 
Thread Tools Search this Thread Display Modes
Old 12-12-2017, 06:21 PM   #1
Blu   Blu is offline
 
Blu's Avatar
 
Join Date: Jun 2016
Posts: 35
Just great!

This is my story, and I'm sticking to it. I was getting ready to take the scooter out. I usually check the oil before I roll it outside, but today I didn't think of it til I was outside. So I reached down to remove the dipstick. It was awkward and I could see it. So I unscrewed it and when I went to pull it out, I fumbled and the thing went flying into the yard. Well, I broke the tip with the graduations off, that little piece about 3/8" long. I don't know where it went. Either, it went flying somewhere never to be seen again, or it fell down in the engine.

So I push it back in and took the truck. When I got home I drained the oil and put an endoscope in there looking for it. I couldn't find it. I refilled the oil and started it up for about 30 seconds. Drained the oil again, still no where to be found. According to the diagram of the engine, the oil pump is the first thing after the screen. So am I right in thinking that nothing gets to the pump without going to the screen first? The filler spout goes somewhere, but I can't see where it goes to. I thought it would just drop to the screen, but it doesn't. So now I'm afraid I'm going to trash my oil pump. Thoughts?


mpsracing.net/technical/helix-manual/02-00.html

This diagram doesn't show the filler spout. If it's that little cut off just about the screen, it looks like it goes in AFTER the screen, that doesn't make sense and it would be disastrous.
__________________
2005 CF Moto "Voyager" 250cc. I don't see where CF Moto made a Voyager, but that's what's on the side.



Login or Register to Remove Ads
  Reply With Quote
Old 12-13-2017, 07:31 AM   #2
cheapeto   cheapeto is offline
 
cheapeto's Avatar
 
Join Date: Jul 2008
Location: York PA
Posts: 339
I do not know your year, but on a Honda parts filch,2000 Helix, if you look at the right crankcase parts diagram, you see the oil filler tube is right beside the screen, so if the broken off tip dropped into it, will be stopped by the screen.
__________________
Ride For Kids.org
  Reply With Quote
Old 12-13-2017, 09:52 AM   #3
Blu   Blu is offline
 
Blu's Avatar
 
Join Date: Jun 2016
Posts: 35
Thanks!
__________________
2005 CF Moto "Voyager" 250cc. I don't see where CF Moto made a Voyager, but that's what's on the side.



Login or Register to Remove Ads
  Reply With Quote
Old 12-13-2017, 10:41 AM   #4
sc00ter   sc00ter is offline
 
Join Date: May 2017
Location: Norfolk, VA
Posts: 607
I have had 2 Honda Helix's and one of those QLINK's (made by CF MOTO) and if that happened to me I wouldn't worry about it. I do know a dipstick from a Helix would work as a replacement, as the QLINK we had the dipstick shattered (plastic got brittle quick) and I just pulled a dipstick out of a extra Helix motor and used that instead. I have also seen CNC long handle dip sticks as I had one on my Helix. Can't recall who I purchased it from, been a long time.
  Reply With Quote
Old 12-13-2017, 11:40 AM   #5
rks   rks is offline
 
rks's Avatar
 
Join Date: Dec 2013
Location: Western New York
Posts: 454
If your luck is anything like mine......your lawn mower tire, will be what finds the lost dipstick.
__________________
2011 Jonway 150cc..16,109 breakdown free miles, and counting




Login or Register to Remove Ads
  Reply With Quote
Old 12-13-2017, 03:18 PM   #6
Blu   Blu is offline
 
Blu's Avatar
 
Join Date: Jun 2016
Posts: 35
Quote:
Originally Posted by sc00ter View Post
I have had 2 Honda Helix's and one of those QLINK's (made by CF MOTO) and if that happened to me I wouldn't worry about it. I do know a dipstick from a Helix would work as a replacement, as the QLINK we had the dipstick shattered (plastic got brittle quick) and I just pulled a dipstick out of a extra Helix motor and used that instead. I have also seen CNC long handle dip sticks as I had one on my Helix. Can't recall who I purchased it from, been a long time.
If I need a part, I just buy a Helix part. I ordered a new Helix dipstick off eBay for $9,05 with free shipping. Finding CFMOTO parts can be a problem. It's a clone of the Helix, same thing. As for that little piece, I'm going to sit down and comb every half inch of the area beside where it was parked. I would really like to know where it is.
__________________
2005 CF Moto "Voyager" 250cc. I don't see where CF Moto made a Voyager, but that's what's on the side.
  Reply With Quote
Old 12-13-2017, 11:14 PM   #7
sc00ter   sc00ter is offline
 
Join Date: May 2017
Location: Norfolk, VA
Posts: 607
The only thing Helix that does not work correctly on a CFMoto/QLINK is the fuel cap. The original QLINK fuel cap gave me problems from the start. Leaked fuel and you could always smell gas while riding. So, I grab the new in bag Helix gas cap for the 2001 Helix I was fixing for a winter project. Yes! No more gas vapor smell. Then, I got vapor lock. Helix gas caps come in different pressures, like a radiator cap, that varies from year to year. The QLINK has a weird tank system to meet more modern emission standards. Being "smart" I poked a tiny hole in the Helix cap, then the QLINK didnt want to idle smooth. Switches/controls have different wiring inside of them also. Its because of the hazard lights on the QLINK that the Helix didn't (ever) have. There are a few more small things that escape memory, but we no longer have the QLINK and I replaced the Helix with a Burgman 200.
  Reply With Quote
Old 12-14-2017, 03:45 PM   #8
Blu   Blu is offline
 
Blu's Avatar
 
Join Date: Jun 2016
Posts: 35
Thanks for the heads up! I expect there are some differences here and there. I haven't had to replace much, so I haven't encountered any problems yet.
__________________
2005 CF Moto "Voyager" 250cc. I don't see where CF Moto made a Voyager, but that's what's on the side.
  Reply With Quote
Old 12-14-2017, 10:03 PM   #9
sc00ter   sc00ter is offline
 
Join Date: May 2017
Location: Norfolk, VA
Posts: 607
CFMoto/QLINK quality can be great for one vehicle, than total trash on the very next one. If you get a good one then it wont give you much, if any, problems. We got a bad quality one. Only put 2000 miles on it in 2 years, and we average 10,000 a year normally. Wife wanted to learn how to ride, and a real Helix was hard to find. Oh well, live and learn. Someone tried to sell me a yellow Helix, forgot the year but it was the last you-choose-the-color year. $500. Ran, but not very well. I passed. Thinking of picking up a sport bike for a project. Just not sure what kind yet. Enjoy your 250 Blu. If you got a good one it will be a fun and reliable scooter for many years to come.
  Reply With Quote
Old 12-15-2017, 09:27 AM   #10
Blu   Blu is offline
 
Blu's Avatar
 
Join Date: Jun 2016
Posts: 35
It had 2100 miles on it April last year when I bought it for $1300. It hadn't been maintained well. But I have the bugs worked out of it, almost 9,000 miles now, running/riding great! Does everything I need it too. Had a Harley, couldn't handle it anymore due to back and other issues. Still got the wind in my hair! (what hair?)
__________________
2005 CF Moto "Voyager" 250cc. I don't see where CF Moto made a Voyager, but that's what's on the side.
  Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:10 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.