|
08-02-2013, 01:33 PM | #2 |
Join Date: Mar 2013
Location: murphy n.c
Posts: 467
|
|
08-02-2013, 10:21 PM | #3 |
Join Date: Jul 2013
Location: N.E. Indiana
Posts: 41
|
A LOT of the scoots that are EPA compliant, do not have mixture screws, or I should say they have a plug over where the screw is, some have the screw underneath , some don't have a screw at all ....
|
08-03-2013, 08:35 AM | #4 |
Join Date: Jul 2011
Location: Connecticut
Posts: 493
|
Very few carbs do not have a mixture screw, usually it is covered by a cap you have to drill out. Some have nothing under the cap. Either way find that cap and remove it, if there's no screw, get a new carb,they are only 30 bucks.
__________________
2011 Roketa MC-23-150 4T 150cc 157 qmj 24mm carb w 115 main jet and paper cone air filter Manual petcock w Tygon fuel lines Scrappy Dog Scooters Retro-slash stainless straight-thru exhaust RED spring clutch Adjustable CDI (brand unknown, it's blue and red and works great!) KOSO high performance variator w 12g sliders Gates Powerlink 835-20-30 belt GPS verified 65mph on flats. |
|
|