|
01-26-2013, 11:40 PM | #1 |
Join Date: Dec 2012
Posts: 22
|
Helllllllllllp plzzzzzzzzzzzzzzzz
Ok i have got a new wiring harness for my tank 50cc urban and the controls .
And im not geting any fire to the plug witch is new cdi work coil work so .? It alsoi has a plug where the cdi is that my old harness did not have anyone know what plug there also idea help me troubleshoot plzzzzz |
01-26-2013, 11:45 PM | #2 |
Join Date: Aug 2011
Location: Tierra Azul, NM
Posts: 739
|
Check continuity to ground first before you begin to explore the rest. I am not real familar with that model or replacemeny harnesses.
__________________
Do not fear mistakes. You will know failure. Continue to reach out. - Benjamin Franklin Join the HARDCORE 1983 Honda GL650I SilverWing |
01-27-2013, 12:03 AM | #3 |
Join Date: Apr 2006
Location: South Haven Michigan
Posts: 225
|
BINGO! Rob is correct..ANYTIME you mess with or change a wiring harness..check ALL grounds. Some harnesses...even if replacements for a specific scoot...may be wired different. Namely the frame and engine grounds. Should be one engine ground and one frame ground. But I have seen a few with 2-3 frame grounds..
|
01-27-2013, 05:32 AM | #4 |
Join Date: Sep 2010
Location: nyc
Posts: 57
|
if the electric start is working , your engine ground is good . Remember your cdi on the green wire needs a ground also same with the coil . Pull the plug from the cdi and be sure the the green wire is fixed to ground all the time . Quick test put a test light or meter to the positive battery then touch the green if you get 12vdc or a light the green ground is good . Then check the black/white wire the same way , with the key in the off position the light should light , with the key on it should not . If that checks out , move on to the stator plug , 2 bullet connectors the black/red should be over 40vac while cranking , the blue one should be .5vac to 2.5vac while cranking .
Lets see above and we can go from there . John |
01-28-2013, 04:23 AM | #6 | |
Join Date: Dec 2012
Posts: 22
|
Quote:
|
|
01-28-2013, 04:57 AM | #7 |
Join Date: Dec 2012
Location: Deltona FLORIDA
Posts: 11
|
you bought a harness ? Buy a new key switch!
|
01-28-2013, 09:00 AM | #8 |
Join Date: Dec 2012
Posts: 22
|
i have spent All i can afford
|
01-28-2013, 02:30 PM | #9 |
Join Date: Jan 2013
Location: South Carolina
Posts: 233
|
You have the option of wiring up an aftermarket switch. Thats what I did but I wouldnt recommend it. I would just make sure all your GREEN wires are grounded right and make sure that blue wire from the pickup module is connected.
__________________
05 Motofino 150cc |
01-30-2013, 12:46 AM | #10 | |
Join Date: Dec 2012
Posts: 22
|
wiring
Quote:
|
|
01-30-2013, 09:28 AM | #11 |
Join Date: Dec 2012
Posts: 22
|
help
|
Tags |
help 50cc tank |
|
|