Register FAQ Community Calendar Today's Posts Search
Go Back   ScootDawg Forums > Performance :: Maintenance :: Technical > 50cc - 124cc
Reply
 
Thread Tools Search this Thread Display Modes
Old 03-22-2013, 05:26 AM   #1
conorclarke201   conorclarke201 is offline
 
Join Date: Dec 2012
Location: Hawaii
Posts: 9
Scoot problems

so i have my all modded up kaitong 2011 scoot works well enough and then one day i go from making good speeds of 35-45 and now im hardly able to make 20 any ideas why this would happen im lost as to the reasoning ive done most of this work myself and we have hardly any mechanics on this island that will work on 4 strokes so im kinda stuck doing it myself so any help would be nice aloha Conor



Login or Register to Remove Ads
  Reply With Quote
Old 03-22-2013, 06:29 AM   #2
prodigit   prodigit is offline
 
Join Date: Jul 2012
Location: Miami, FL
Posts: 390
There are probably as many possible reasons as there are possible problems on a scoot.
I mean, with the info given it could be a lot of things...

It could be a worn belt, that needs replacement, or a not fully inflated tire (most common I believe).
It could be you just where unlucky to ride with wind against or uphill.
It could be that you're riding short trips and the engine does not warm up enough.
It could be that it's time for an oilchange,
It could be a lot of things, but these are just but a few possibilities...
__________________



  Reply With Quote
Old 03-22-2013, 11:15 AM   #3
MEAN_MOTOFINO   MEAN_MOTOFINO is offline
 
MEAN_MOTOFINO's Avatar
 
Join Date: Jan 2013
Location: South Carolina
Posts: 233
Check fuel filter and check for sufficient fuel flow when vacuum is applied to the Fuel Cock. It will be the outer most nipple , where a hose runs to the engine. Just suck on it and see if fuel flows steadily.
__________________
05 Motofino 150cc



Login or Register to Remove Ads
  Reply With Quote
Old 03-22-2013, 11:27 AM   #4
antchainscoot   antchainscoot is offline
 
antchainscoot's Avatar
 
Join Date: Apr 2012
Posts: 13
I had this issue a little over two weeks ago with the 150cc. Not sure this is your problem. I removed the carb top with the two screws where the springs pop out. I put it back on but didn't tighten one of the screws enough. Air was getting in between the carb. I started to ride but it wouldn't go faster than my 50cc scooter. Came back after a half mile ride to the house. Tightened the screw and the 150cc was back to normal.
  Reply With Quote
Old 03-22-2013, 07:24 PM   #5
teddy554   teddy554 is offline
 
teddy554's Avatar
 
Join Date: Sep 2011
Location: staunton va
Posts: 319
i would adjust the valves
__________________

2010 Cpi Oliver 70cc, naruku trans kit, downhill handle bars, tecnigas rsll pipe, s6 4g rollers, Vento R4 with 90cc 1e52qmf technigas next r 100cc pipe Naruku, 21mm race carb, s6 4.5 g rollers



Login or Register to Remove Ads
  Reply With Quote
Old 03-30-2013, 10:23 PM   #6
conorclarke201   conorclarke201 is offline
 
Join Date: Dec 2012
Location: Hawaii
Posts: 9
and yesterday it dies completely just stopped i opened up the cvt belt isent broken so idk i changed the oil also a few days back idk prolly got to take it to a real mechanic lol
  Reply With Quote
Old 03-31-2013, 04:45 AM   #7
Jellofingers   Jellofingers is offline
 
Jellofingers's Avatar
 
Join Date: Mar 2013
Location: Kihei, Maui
Posts: 19
I had that issue before I was hit but a truck on my Kait, it turned out, I changed my Spark plug (gaping properly) and the replaced the coil. That did the trick for me.
  Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:05 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.