|
03-19-2013, 10:27 PM | #1 |
Join Date: Mar 2013
Posts: 4
|
What next?
So I bought this scooter and paid a guy to put a 100cc BBK on it. He said he put a 24mm carb on it, new CDI and a set of up-gears. What is something cheap that I can or should do to this scooter to make it perform better? It performs well, will go about 50mph with good acceleration. And what did this guy mean by up-gears?
|
03-19-2013, 10:32 PM | #2 |
Join Date: May 2012
Location: missouri
Posts: 164
|
if it goes 50 leave it be
__________________
B.A.M.F. tapout scoot 24mm carb 150cc intake performance exhaust A9 cam hoca big valve head 16/50 gears 9.25 gram dr pulley sliders koso variator 1.5k torque spring orange coil orange unlimted cdi uni filter gates premium belt 2012 taotao vip cy50a scrappys 110cc big bore kit 52mm "88cc" 100 main jet 38 idle iridium plug custom paint, leds and decals alarm system naraku hd crankshaft |
03-19-2013, 11:02 PM | #4 |
Join Date: Jan 2013
Location: South Carolina
Posts: 233
|
Make sure your valve stems arent leakiing. I didnt pay attention to what year your scoot is but they are known to leak.
__________________
05 Motofino 150cc |
03-20-2013, 09:26 AM | #6 |
Join Date: Aug 2011
Location: Tierra Azul, NM
Posts: 739
|
Doesn't sound like the tire is a 2013... Bummer time for a new tire
__________________
Do not fear mistakes. You will know failure. Continue to reach out. - Benjamin Franklin Join the HARDCORE 1983 Honda GL650I SilverWing |
03-20-2013, 06:26 PM | #7 |
Join Date: May 2011
Location: Nanty Glo, Pa.
Posts: 163
|
Check the valve stem, the valve works loose by times.
|
03-20-2013, 06:41 PM | #8 |
Join Date: Mar 2013
Posts: 4
|
I soaped it down and found where the leaks are. In three of the little treads right next to each other on the tire. I put some slime in it and hopefully it fixes it. I feel sorry for the poor SOB who changes my tire in the future. Thanks for all the help though.
Opinions on windshields anyone? |
|
|