Register FAQ Community Calendar Today's Posts Search
Go Back   ScootDawg Forums > Performance :: Maintenance :: Technical > 50cc - 124cc
Reply
 
Thread Tools Search this Thread Display Modes
Old 06-07-2014, 08:51 AM   #1
dwint51   dwint51 is offline
 
Join Date: Mar 2013
Location: murphy n.c
Posts: 467
different clutches

thinking about buying a new clutch for my jonway 2t.i heard there is different types.went on ebay but they just say will fit most Chinese scooters.mine has three pads not two if that helps



Login or Register to Remove Ads
  Reply With Quote
Old 06-08-2014, 01:25 PM   #2
mmsscooters   mmsscooters is offline
 
mmsscooters's Avatar
 
Join Date: Feb 2014
Location: las vegas
Posts: 100
The Chinese aftermarket clutches are worthless, the clutch bells are nice but the clutch shoes themselves are horrible, if you get a performance clutch shoe and remove the 3 shoes and weigh them, they will all be different, sometimes 10g off. If you want a clutch go with hoca or ncy, something Taiwanese. You get what you pay for
  Reply With Quote
Old 06-08-2014, 05:45 PM   #3
dwint51   dwint51 is offline
 
Join Date: Mar 2013
Location: murphy n.c
Posts: 467
reason im asking is one of my pads came off and only 550 miles.i glued it back on with gorilla two part epoxy and so far 30 miles its good but I don't want to ride far or have the rear wheel lock up on me



Login or Register to Remove Ads
  Reply With Quote
Old 06-08-2014, 05:59 PM   #4
dwint51   dwint51 is offline
 
Join Date: Mar 2013
Location: murphy n.c
Posts: 467
Quote:
Originally Posted by dwint51 View Post
reason im asking is one of my pads came off and only 550 miles.i glued it back on with gorilla two part epoxy and so far 30 miles its good but I don't want to ride far or have the rear wheel lock up on me
found a performance clutch on ebay for forty dollars from scappy dog scooters.question I have is aren't those springs going to be stiffer and not perform as good as to what I have on there.i have every thing stock on my scoot
  Reply With Quote
Old 06-09-2014, 08:24 AM   #5
blueboy5000   blueboy5000 is offline
 
blueboy5000's Avatar
 
Join Date: Jul 2011
Location: Connecticut
Posts: 493
That clutch will come with 1k springs and 2k springs. Use the RED springs.

The stiffer springs will not actuate until 2k RPMS, and will give you a noticeably better "launch".
__________________
2011 Roketa MC-23-150

4T 150cc 157 qmj

24mm carb w 115 main jet and paper cone air filter

Manual petcock w Tygon fuel lines

Scrappy Dog Scooters Retro-slash stainless straight-thru exhaust

RED spring clutch

Adjustable CDI (brand unknown, it's blue and red and works great!)

KOSO high performance variator w 12g sliders

Gates Powerlink 835-20-30 belt

GPS verified 65mph on flats.



Login or Register to Remove Ads
  Reply With Quote
Old 06-09-2014, 08:25 AM   #6
blueboy5000   blueboy5000 is offline
 
blueboy5000's Avatar
 
Join Date: Jul 2011
Location: Connecticut
Posts: 493
also;|

STOP RIDING ON THAT GORILLA-GLUED CLUTCH!!!!
__________________
2011 Roketa MC-23-150

4T 150cc 157 qmj

24mm carb w 115 main jet and paper cone air filter

Manual petcock w Tygon fuel lines

Scrappy Dog Scooters Retro-slash stainless straight-thru exhaust

RED spring clutch

Adjustable CDI (brand unknown, it's blue and red and works great!)

KOSO high performance variator w 12g sliders

Gates Powerlink 835-20-30 belt

GPS verified 65mph on flats.
  Reply With Quote
Old 06-09-2014, 09:25 AM   #7
dwint51   dwint51 is offline
 
Join Date: Mar 2013
Location: murphy n.c
Posts: 467
when mine is on the center stand the rear wheel moves at 2000 rpms so im guessing mine are 2000 stock?
  Reply With Quote
Old 06-10-2014, 01:59 AM   #8
Firehawk989   Firehawk989 is offline
 
Join Date: Mar 2013
Location: Vancouver, BC
Posts: 198
2k springs means it will engage 2k higher than the stock ones, so they should engage around 4k.
__________________

2005 Yamaha BWS (Zuma) "Garfield"
TP Black Trophy 70cc, Giannelli Reverse Pipe, 5g Dr. Pulley Sliders, Delta Clutch with Yellow Springs and Yellow Contra, Malossi Torque Controller, Naraku R-Vent Bell, NCY Adjustable Secondary Sliding Sheave, CF Reeds, Kege Analog Tach, Dual Headlight Mod, N.A. Rear Fender Delete, OEM Short Windshield.
  Reply With Quote
Old 06-10-2014, 03:37 AM   #9
dwint51   dwint51 is offline
 
Join Date: Mar 2013
Location: murphy n.c
Posts: 467
I like mine the way it is.do they all come color coded even stock ones?if so ill just keep the ones I have and put them on the new one since I have less than 600 miles.my scoot came with a gates belt stock.thats not bad for chinese
  Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:46 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.