![]() |
|
![]() |
#1 |
![]() Join Date: Mar 2013
Location: Kihei, Maui
Posts: 19
|
Dash issues CPI GTR 50
I as so baffled
![]() Last edited by Jellofingers; 04-01-2013 at 11:42 PM. |
![]() |
![]() |
#2 |
![]() Join Date: Sep 2011
Location: staunton va
Posts: 319
|
Have you check the connector in the plugs from the dash unit to make sure they are making a good connection, also check all your grounds wires.I would test to see if you have juice before and after the plug. Most speeds have a plug connection 10-12 from the back of the speedo
__________________
![]() ![]() 2010 Cpi Oliver 70cc, naruku trans kit, downhill handle bars, tecnigas rsll pipe, s6 4g rollers, Vento R4 with 90cc 1e52qmf technigas next r 100cc pipe Naruku, 21mm race carb, s6 4.5 g rollers ![]() |
![]() |
![]() |
#4 |
![]() Join Date: Mar 2013
Location: Kihei, Maui
Posts: 19
|
well, the kid who had the bike before me tore out almost all the wiring from the dash unit... My gosh what a mess. The Dash unit has 13 wires.. Finding grounds may be a little more than I can handle, Engines are way more my speed. these are the wires:
Red Black Grey / blue stripe Green Green / Red stripe Tan (light brown) looks Orange in the blury picture, sorry about that Yellow Dark Green Dark Blue Red / White stripe Light Green / Yellow stripe Dark Brown White / Red stripe ![]() |
![]() |
![]() |
#6 |
![]() Join Date: Mar 2013
Location: Kihei, Maui
Posts: 19
|
here is a quick look at what my dash does, or rather what it doesn't do.. Now ever you want to look at it....
__________________
![]() |
![]() |
![]() |
|
|