|
07-09-2014, 03:36 PM | #2 |
Join Date: Jul 2014
Location: Raleigh, NC
Posts: 11
|
look up the parts diagram and get the p/n..then reference the p/n against the specs of replacement ones. It is either that or find someone that has a digital scale and weigh each one, typical stock are 6-7 grams..if you run too light you lose top speed..
I prefer top speed..takeoff is nice initially for awhile but the end is always who goes faster and further..traffic behind you does not care about take off speed as an example, why get stuck at 35 when 45-50 is preferred.. Better take off is typically achieved by increasing the hp and air flow..free flowing intake/filter and a larger jet begins the process..then cdi and a better hotter coil plug to burn the mix, etc.. |
07-10-2014, 08:16 AM | #3 |
Join Date: Jul 2008
Location: York PA
Posts: 339
|
This may help you.
http://www.beedspeed.com/html-pages/...ghts-chart.htm |
07-10-2014, 09:26 AM | #4 |
Join Date: Mar 2013
Location: murphy n.c
Posts: 467
|
thanks but my model wasn't there
|
07-16-2014, 08:13 AM | #5 |
Join Date: Jul 2011
Location: Connecticut
Posts: 493
|
You can use regular gy6 50cc sliders, they are the same size as your bike's weights.
__________________
2011 Roketa MC-23-150 4T 150cc 157 qmj 24mm carb w 115 main jet and paper cone air filter Manual petcock w Tygon fuel lines Scrappy Dog Scooters Retro-slash stainless straight-thru exhaust RED spring clutch Adjustable CDI (brand unknown, it's blue and red and works great!) KOSO high performance variator w 12g sliders Gates Powerlink 835-20-30 belt GPS verified 65mph on flats. |
07-16-2014, 08:22 AM | #6 |
Join Date: Mar 2013
Location: murphy n.c
Posts: 467
|
im wondering if I should lighter.i need to no what the stock grams are so I can try lighter ones
|
07-16-2014, 11:01 AM | #8 |
Join Date: Mar 2013
Location: murphy n.c
Posts: 467
|
I know but I was hoping since I have a common model someone would have done what im doing.im gonna guess they are 6.5 that seems to be common lol
|
08-12-2014, 03:32 PM | #9 |
Join Date: Mar 2013
Location: murphy n.c
Posts: 467
|
|
|
|