|
|
|
09-15-2016, 06:52 PM
|
#1 |
 Join Date: Jul 2016
Posts: 18
|
Clutch install 1500 rpm spring
How would i get this thing on. Stock spring, i cam squeeze easily amd get the belt down. With this spring i cant. Ideas?
__________________
Smm jazzie gy6 , from 50 to 100cc Orange black cdi cable Purple racing cdi box 20mm carb jets unknown as of now Open element air filter Mirror stereo system Roller weight nd clutch spring unkown Rider 6 foot 270 pounds |
|
|
09-15-2016, 11:22 PM
|
#2 |
 
Join Date: Mar 2010
Location: Houston area
Posts: 945
|
I have a new torque spring to install too. I haven't tried yet.
__________________
"Beer never broke my heart" - Luke Combs |
|
|
|
09-16-2016, 02:46 PM
|
#3 |
Join Date: Jul 2016
Location: Lexington KY
Posts: 52
|
take off the variator pulley. I'm a small dude, but the clutch shouldn't be that hard to compress with two hands, i do it all the time. Try it hands at 9 and 3 and have someone push the belt in between the pulley
__________________
All about that lowered life #fear_of_heights |
|
|
|
09-17-2016, 07:48 PM
|
#4 |
|
Join Date: Jul 2016
Posts: 18
|
I got it, easy solution. I put the belt into the plates before i put the clutch back together. Taped the belt together so it was around halfway down the plates, put the clutch on its rod. Assembled variator,and the the clutch. I also made a compression tool with a couple long bolts amd 2 boards with hole in top to let a socket tighten the nut. I wannna post a picture of it. It worked very well and cheap amd easy to make.
__________________
Smm jazzie gy6 , from 50 to 100cc Orange black cdi cable Purple racing cdi box 20mm carb jets unknown as of now Open element air filter Mirror stereo system Roller weight nd clutch spring unkown Rider 6 foot 270 pounds |
|
|
 |
|
|
Linear Mode
