View Single Post
Old 01-27-2013, 05:32 AM   #4
tvnacman   tvnacman is offline
 
Join Date: Sep 2010
Location: nyc
Posts: 57
if the electric start is working , your engine ground is good . Remember your cdi on the green wire needs a ground also same with the coil . Pull the plug from the cdi and be sure the the green wire is fixed to ground all the time . Quick test put a test light or meter to the positive battery then touch the green if you get 12vdc or a light the green ground is good . Then check the black/white wire the same way , with the key in the off position the light should light , with the key on it should not . If that checks out , move on to the stator plug , 2 bullet connectors the black/red should be over 40vac while cranking , the blue one should be .5vac to 2.5vac while cranking .

Lets see above and we can go from there .

John
  Reply With Quote