ScootDawg Forums - View Single Post

rks · 03-24-2016, 07:18 AM

Checked the valve clearances, and the spark plug. Valves were just fine, .004" & .005", no adjustment needed...infact, the last time they actually needed to be adjusted, was June of 2013, at 2,500 miles.....now at 9,060.

Spark plug still looks fine too.....although the gap had opened up a bit to .030". Reset to .025", and put it back to work. This is the original plug, and I've been thinking about replacing it....but it has given me no reason to....scooter starts and runs fine, has plenty of power, and the fuel mileage gets better every year. If that should start to drop off, I'll get a new plug.

03-24-2016, 07:18 AM	#60
rks Join Date: Dec 2013 Location: Western New York Posts: 454	Checked the valve clearances, and the spark plug. Valves were just fine, .004" & .005", no adjustment needed...infact, the last time they actually needed to be adjusted, was June of 2013, at 2,500 miles.....now at 9,060. Spark plug still looks fine too.....although the gap had opened up a bit to .030". Reset to .025", and put it back to work. This is the original plug, and I've been thinking about replacing it....but it has given me no reason to....scooter starts and runs fine, has plenty of power, and the fuel mileage gets better every year. If that should start to drop off, I'll get a new plug. __________________ 2011 Jonway 150cc..16,109 breakdown free miles, and counting Last edited by rks; 09-03-2017 at 06:05 PM.
	0