ScootDawg Forums - View Single Post

taz001 · 07-15-2013, 07:55 PM

When I line up on the green mark which is the end of the box enclosing the arrow beside the "T", the cam will not get horizontal in relationship to the top of the head. but when I line up either the individual red mark beside the "F" or the end of the arrow(depending on which tooth I use on the cam), the cam will get horizontal in relationship to the top of the head. Which mark then would be TDC? I'm thinking the end of the arrow, correct me if I'm wrong. Where I have the blue mark is the TDC indicator, also correct?

Cam is horizontal like this in reference to the top of the head, correct?

Thanks for the help guys.

07-15-2013, 07:55 PM	#6
taz001 Join Date: Jul 2012 Location: NE oHIo Posts: 159	Rebuild--setting timing When I line up on the green mark which is the end of the box enclosing the arrow beside the "T", the cam will not get horizontal in relationship to the top of the head. but when I line up either the individual red mark beside the "F" or the end of the arrow(depending on which tooth I use on the cam), the cam will get horizontal in relationship to the top of the head. Which mark then would be TDC? I'm thinking the end of the arrow, correct me if I'm wrong. Where I have the blue mark is the TDC indicator, also correct? Cam is horizontal like this in reference to the top of the head, correct? Thanks for the help guys. __________________ 1981 C70 honda 2007 Xingyue ita 150t(X2) 1976 Vespa Bravo(2) 1980 Vespa Ciao 1967 Sears Allstate Do I continue? "Freedom is just another word for nothin' left to lose." Janis Joplin 1943-1970
	0