Quote:
Originally Posted by rks
Easy enough to pull fuel line from barb on the carb, then open your manual petcock and check the flow rate. Could be some crud in the tank, restricting the flow.
I assume that you adjusted the valve gaps after installing your top end kit.
As Roscoe eluded.......no vac lines attach to the valve cover.....that is a breather hose, and must remain open.
|
1。Fuel flow looks good but hell im not the scooter i dont know how much it needs. Im using a sintered fuel filter one of those see thru ones with the filtering filament being a ton of teeny little brass balls. I will remove the filter and see how that affects the scooter, will report results when i work on scooter after work today.
2。valve clearances for both intake and exhaust were set by me at .005" when i installed the top end kit.
3。i simply led a hose from valve cover all the way to somewhere above the gas tank as i saw thats what people do in place of installing an oil catch can.