Quote:
Originally Posted by andrewrides1
You have the right size jet for your displacement. what i would do is check for restriction in exhaust and/or buy an aftermarket exhaust which will let you push more air. After that you could probably untape your filter. if it still idles to high adjust the idle scew to where the back wheel just wants to move. the orange coil delivers a hotter spark to the spark plug, which in turn boosts acceleration and gas mileage. what size rollers do you have. heavier will give you more top end speed, lighter more acceleration less top end. You need an iridium brand spark plug for the type of engine you have they are the absolute best for scooters you can aquire that and much more at http://www.scrappydogscooters.com/Home_Page.php . just search performance under engine type. Taller gears would only be necessary if you put in a bbk because you need the extra cc's to pull them. They are easy to put in you just have to have them pressed at a shop. This will give you an idea of the process http://www.scootnfast.com/scooter/Tu...Rear_Gears.htm . |
Thanks again! I'll check for restrictions in the exhaust later and probably make a thread about the process.
My order now consists of the following:
http://www.amazon.com/gp/product/B00...=AQD3J1SX05RBE
http://www.amazon.com/gp/product/B00...=AGINYPD9X8MQG
http://www.amazon.com/gp/product/B00...A330RSCAONKJ2X
I'm not sure what size roller weights I currently have, I'll go check some time later.
Isn't NGK iridium? Because that's what I have, an NGK spark plug, and it was the most expensive one autozone had. Now I'm not so sure...
EDIT: You wouldn't happen to know what size belt I should get for more speed, would you?