View Single Post
Old 04-03-2013, 01:39 AM   #120
MEAN_MOTOFINO   MEAN_MOTOFINO is offline
 
MEAN_MOTOFINO's Avatar
 
Join Date: Jan 2013
Location: South Carolina
Posts: 233
Whats up everybody!!

Time for yet another update !

I am in the process of replacing my POS 24mm CHINESE contraption of a carb for a Japanese Keihin 30mm.

While doing this I am making sure all the ports match/line up, because last time I did not pay attention to how they lined up, and it wasnt very pretty. So I modified my intake spacers(running two with this carb) and I had to remove quite a bit material from the intake manifold(to match it to the new carb) that I had already ported rather heavily.

What im using is a used carb but it is like new on the inside and it came off a running scoot, so it should work nicely!

Pics

24mm vs 30mm





Porting the manifold and spacers to more closely match the carb



How the spacer matches (not perfect...but its a scooter !! lol)






Feel free to comment or make suggestions ... Thanks SD
__________________
05 Motofino 150cc
  Reply With Quote