Been workin on the scoot a little bit today. Gave her a much needed bath!
I also took apart the transmisson. I cleaned and lubed the rollers & variator assembly.I put my old modded variator face on from the old motor(modified for better take off as well as more top end. The faces will let the belt ride lower for take off and also squeeze together tighter for higher top speed).
I also took the rear apart to clean out the junk chinese grease in the bearing and put nice stuff in. Sanded the clutch pads in hopes that they will bite more and also sanded inside the clutch housing, where the pads ride.
I changed my oil and am now running fully synthetic 10w40 and running fully synthetic 70w90 in the rearend.
She should fly now!!