Scoot Questions
 

I have just purchased a used 2008 Jonway, or so I was told it was, 150cc, It has had some major upgrades. Big bore kit, larger carb, performance exhaust, upgraded variator springs, and a oil cooler. Its fast, really fast to be exact. But it has an oil leak. I was wondering what weight of oil I should be using and how much.

Hi
Welcome aboard
Pleased to meet you
Since you just got her i would give her a full pdi, you will get to know about your scoot and her needs and give her a wonderful start on a good long life
I gave a pdi to any scoot i may get whether new or used it makes no difference
http://x1scooters.com/pdi.html
Take care and ride safely
Yours Hank

I am giving her the once over. I traced te oil leak back t something next to the carb. Is held in with 2 bolts and has a hole in the center. Looking over the engine diagram to see what it is. Turns out I was missing a screw. Ran up to Gomoto in minneapolis and got a new one.

22oz of 15w40 is what I use. Usually sold by the gallon for diesel engines.

Being a ex truck driver, I run Rotella T 15w-40w in everything I own. :tup: . http://ts1.mm.bing.net/th?id=H.46847...h=175&c=7&rs=1